Install Titles on a USB Storage Device

The following describes how to install titles on a USB storage device that is attached to a CAT-DEV or CAT-R system. On a CAT-R, you may install titles from an SD card to a USB storage device. On a CAT-DEV, you may install titles from an SD card or through PCFS from host PC. The helloworld demo is used as an example application.

Perform the following tasks before you may install titles to the USB storage device:

To install titles on a USB storage device using the System Config Tool and an SD card

  1. Insert an SD card and USB storage device into the CAT-R or CAT-DEV, and then turn on the CAT-R or CAT-DEV.
  2. Copy to the root of the SD card the folder $CAFE_ROOT/data/mlc/install/[title]_p01 that was created when you mastered the application. In this example, the title is helloworld_p01. Do not copy the files directly to the root of the SD card. If you have multiple titles in separate folders, you may copy all of them to the SD card.
    1. In the System Config Tool Root Menu, navigate to Data Manager, and then press the A Button.
    2. In the Data Manager menu, navigate to Title Manager, and then press the A Button.
    3. In the Title Manager menu, navigate to Copy, and then press the A Button.
    4. In the Select Destination Device menu, navigate to the SD card, and then press the A Button.
    5. To select each of the titles that you want to copy to the SD card, in the Title Manager>Copy menu, navigate to the appropriate title, and then press the A Button. Continue until all titles to be copied are selected.
    6. Press the R Button, and then press the A Button to verify that you want to copy the selected titles.
  3. In the Title Manager menu, navigate to Install, and then press the A Button.
  4. In the Install menu, navigate to SD Card, and then press the A Button. The installable titles are usually listed on /vol/app_sd.
  5. For each title to install, highlight the title, and then press the A Button.
  6. To switch to USB as the install device, press the L Button until the path contains => [usb]. For example:
    Path : /vol/app_sd/install => [usb]
  7. To start installing the selected titles, press the R Button. A progress dialog box is displayed.

To install the titles on USB using System Config Tool command line (CAT-DEV only)

  1. Insert the USB storage device into the CAT-DEV.
  2. On the host PC, navigate to the folder where you installed the Cafe SDK, and then double-click cafe.bat. The Cygwin command window opens.
  3. In the Cygwin command window, type cafeon and then press ENTER.
    NOTE:
    Do not press CTRL+C after the CAT-DEV reboots.
  4. In the System Config Tool command window, type set_install_dev usb and then press ENTER. The message "Set target device to usb" is displayed.
  5. Type install /vol/storage_hfiomlc01/install/title_p01, where title_p01 is the name of title that you mastered, and then press ENTER. In this example, the name of the mastered title is helloworld_p01.


    When the title is installed on the USB storage device, the message "Install /vol/storage_hfiomlc01/install/[title_p01] Done" is displayed.

To verify the installed titles, see List Titles Installed on USB and Checking Their Size.

For information on how to find and launch the newly installed title, see Launch a Title from a USB Storage Device.

Revision History

2013/05/08 Automated cleanup pass.
2012/12/19 Added new link and fixed an old link.
2012/09/05 Initial document


CONFIDENTIAL